Toy motor withstand voltage

The maximum withstand voltage of a toy motor depends on the specific motor type and specifications. Based on the search results, we can summarize as follows: Voltage range: The voltage range of the toy motor is generally between 1.5V and 12V. This scope covers a variety of application scenarios, including but not limited to toy cars, remote control cars, etc. 12 No-load and loaded conditions: Under no-load conditions, the motor can withstand up to twice the rated voltage. This means that if the rated voltage of the motor is 1.5V, it can withstand a voltage as high as 3V without exceeding its design limit. 1 In the case of load, the power of the motor should not exceed 1W. This means that under a specific load, the high power at which the motor can operate safely is 1W. Current limit: For toy car motors, the current that can be withstood is closely related to the voltage. In the voltage range of 1.5V to 6V, the current that a normal toy car motor can withstand should generally not exceed 1A. 3 Recommendations: When selecting and using a toy motor, ensure that it does not exceed its nominal large voltage range. Under no-load conditions, you can try to approach or reach twice the rated voltage of the motor, but you should use caution to avoid damage. Under load conditions, ensure that the power of the motor does not exceed 1W to avoid overheating and damage. Pay attention to the current limit to avoid exceeding the range that the motor can withstand, especially when using poor quality toys, pay more attention to the damage that may be caused by excessive current. In short, the correct understanding and application of this information is essential to protect the toy motor and extend its service life.

09

2021

/

11

Toy car motor commonly used model introduction

1. DC motor 1.130 motor The 130 motor is a common toy car motor. Its external dimensions are 13mm × 15mm × 20mm, and its working voltage is usually between 3V and 9V, which can output higher speed and torque. The 130 motor is suitable for light toy vehicles (such as small cars, track cars, etc.), and the price is relatively cheap. 2.180 motor The 180 motor is a larger toy car motor with an external dimension of 18mm × 24mm × 30mm and a working voltage range of 3V ~ 12V. Due to its large output speed and torque, it is suitable for heavy-duty toy vehicles (such as remote control vehicles, off-road vehicles, etc.), and the price is slightly more expensive. 3.260 motor The 260 motor is a large, high-power toy car motor with an external dimension of 25mm × 30mm × 38mm and a working voltage range of 3V ~ 12V. Due to its large output speed and torque, it is suitable for relatively large toy vehicles (such as off-road vehicles, chariots, etc.), but the price is relatively high. 2. brushless motor Brushless motor is a relatively new type of toy car motor, which has the characteristics of high efficiency, low noise and long life. Brushless motors are divided into different specifications such as 1/16, 1/10, 1/8, 1/5, etc., of which 1/10 and 1/8 are the most commonly used. Due to the relatively high price of brushless motors, they are generally used in high-end remote control vehicles, large off-road vehicles, etc. 3. purchase considerations and maintenance methods When buying a toy car motor, you need to pay attention to the following points: 1. According to the purpose of the toy car to choose the appropriate motor model and specifications; 2. Pay attention to the working voltage and current of the motor, which must be matched with the power supply of the toy car; 3. Choose products with good quality and high brand reputation, and avoid using inferior products. During use, pay attention to the following points to extend the life of the motor: 1. Avoid overload use and do not let the motor work for a long time; 2. Always clean the surface of the motor to maintain good heat dissipation; 3. Reasonable protection circuit to prevent reverse circuit or short circuit. The above is a toy car commonly used motor models and some precautions and maintenance methods. I hope it will be helpful for you to understand and use the toy car motor.

09

2021

/

11

All
  • All
  • Product Management
  • News

Shantou Jintiansheng Plastic Co., Ltd.
Mainly produces toy car gear, toy precision gear box, plastic gearbox, toy reducer, toy car accessories, micro motor, iron shaft, etc.

QR Code

Shantou Jintiansheng Plastic Co., Ltd
Business License