News

knowledge

Company News

Industry news

What are the parameters of the toy motor

What are the parameters of the toy motor

1. voltage parameter Toy small motor voltage is generally between 1.5 V-12V, according to the need to choose. If the voltage is too large or too small, it will affect the normal operation of the motor, or even damage the motor. Therefore, in the purchase of toy pony, we should pay attention to choose the appropriate voltage parameters according to their own needs. 2. power parameters The power of a small toy motor determines the torque and speed it can output, usually between 0.1 W-1W. When in use, also need to choose according to need. If you need to drive a larger toy, such as a model car or airplane, you need to choose a more powerful motor. 3. speed parameter Speed is an important parameter to measure the performance of a toy small motor, generally between 5000rpm-20000rpm. The higher the speed, the faster the toy moves, but it also needs to consume more electricity, so it also needs to be selected according to actual needs. In addition to the above three parameters, there are some other parameters also need to pay attention to, such as rated current, peak torque and so on. At the time of purchase, you can consult a professional salesperson or ask the manufacturer for specific parameters. When using a toy pony, you also need to pay attention to some matters. The first is to install the motor correctly and make sure it is properly connected to the power supply and other circuits. The second is to pay attention to the use time and temperature of the motor to avoid overheating or damage due to excessive use of the motor. Finally, regular cleaning and maintenance should be carried out to extend its service life. In short, the parameters of the toy small motor are important factors that affect its performance. Pay attention to the above points when purchasing and using to ensure the normal operation of the toy.

12

2021

/

11

How to repair a broken toy motor

How to repair a broken toy motor

Toy small motor is one of the common parts in children's toys, but its service life is limited and it is prone to failure. At this time, we need to repair and maintain the toy small motor. Below, we will specifically introduce the steps and methods for repairing toy small motors.

12

2021

/

11

Toy motor withstand voltage

Toy motor withstand voltage

The maximum withstand voltage of a toy motor depends on the specific motor type and specifications. Based on the search results, we can summarize as follows: Voltage range: The voltage range of the toy motor is generally between 1.5V and 12V. This scope covers a variety of application scenarios, including but not limited to toy cars, remote control cars, etc. 12 No-load and loaded conditions: Under no-load conditions, the motor can withstand up to twice the rated voltage. This means that if the rated voltage of the motor is 1.5V, it can withstand a voltage as high as 3V without exceeding its design limit. 1 In the case of load, the power of the motor should not exceed 1W. This means that under a specific load, the high power at which the motor can operate safely is 1W. Current limit: For toy car motors, the current that can be withstood is closely related to the voltage. In the voltage range of 1.5V to 6V, the current that a normal toy car motor can withstand should generally not exceed 1A. 3 Recommendations: When selecting and using a toy motor, ensure that it does not exceed its nominal large voltage range. Under no-load conditions, you can try to approach or reach twice the rated voltage of the motor, but you should use caution to avoid damage. Under load conditions, ensure that the power of the motor does not exceed 1W to avoid overheating and damage. Pay attention to the current limit to avoid exceeding the range that the motor can withstand, especially when using poor quality toys, pay more attention to the damage that may be caused by excessive current. In short, the correct understanding and application of this information is essential to protect the toy motor and extend its service life.

09

2021

/

11

Toy car motor commonly used model introduction

Toy car motor commonly used model introduction

1. DC motor 1.130 motor The 130 motor is a common toy car motor. Its external dimensions are 13mm × 15mm × 20mm, and its working voltage is usually between 3V and 9V, which can output higher speed and torque. The 130 motor is suitable for light toy vehicles (such as small cars, track cars, etc.), and the price is relatively cheap. 2.180 motor The 180 motor is a larger toy car motor with an external dimension of 18mm × 24mm × 30mm and a working voltage range of 3V ~ 12V. Due to its large output speed and torque, it is suitable for heavy-duty toy vehicles (such as remote control vehicles, off-road vehicles, etc.), and the price is slightly more expensive. 3.260 motor The 260 motor is a large, high-power toy car motor with an external dimension of 25mm × 30mm × 38mm and a working voltage range of 3V ~ 12V. Due to its large output speed and torque, it is suitable for relatively large toy vehicles (such as off-road vehicles, chariots, etc.), but the price is relatively high. 2. brushless motor Brushless motor is a relatively new type of toy car motor, which has the characteristics of high efficiency, low noise and long life. Brushless motors are divided into different specifications such as 1/16, 1/10, 1/8, 1/5, etc., of which 1/10 and 1/8 are the most commonly used. Due to the relatively high price of brushless motors, they are generally used in high-end remote control vehicles, large off-road vehicles, etc. 3. purchase considerations and maintenance methods When buying a toy car motor, you need to pay attention to the following points: 1. According to the purpose of the toy car to choose the appropriate motor model and specifications; 2. Pay attention to the working voltage and current of the motor, which must be matched with the power supply of the toy car; 3. Choose products with good quality and high brand reputation, and avoid using inferior products. During use, pay attention to the following points to extend the life of the motor: 1. Avoid overload use and do not let the motor work for a long time; 2. Always clean the surface of the motor to maintain good heat dissipation; 3. Reasonable protection circuit to prevent reverse circuit or short circuit. The above is a toy car commonly used motor models and some precautions and maintenance methods. I hope it will be helpful for you to understand and use the toy car motor.

09

2021

/

11

< 12 >
Shantou Jintiansheng Plastic Co., Ltd

Phone:

+8613085790878

E-mail:

793291156@qq.com

language
All
  • All
  • Product Management
  • News

Shantou Jintiansheng Plastic Co., Ltd.
Mainly produces toy car gear, toy precision gear box, plastic gearbox, toy reducer, toy car accessories, micro motor, iron shaft, etc.

QR Code

Shantou Jintiansheng Plastic Co., Ltd

Powered by 300.cn  | SEO Tags   

Business License